In Pictures

Gallery|Israel-Palestine conflict

Photos: Fears over Al-Aqsa stained-glass windows

Israeli raids at the Al-Aqsa Mosque compound have led to windows being damaged and destroyed.

Save

The stained glass windows used in the Al-Aqsa Mosque compound are difficult to replicate, with every square metre needing approximately 25 days of work.
By Dalia Hatuqa

Editor’s Note: This article was first published in October 3, 2014 and updated on April 26, 2022 following the destruction of several stained-glass windows during Israeli raids on the Al-Aqsa Mosque compound in the preceding weeks.

Occupied East Jerusalem – Al-Aqsa and the Dome of the Rock, the two mosques inside the Al-Aqsa Mosque compound, are some of the most memorable Islamic landmarks in the world, places for solemn prayer and a refuge for those seeking respite. On any given afternoon, the sun shines through their stained-glass windows, casting vibrantly coloured shadows onto small groups of Quran reciters by the colonnades of the religious sites.

The Dome of the Rock, one of the oldest works of Islamic architecture, is made of marble and glazed tilework on the outside, and in constant need of care.

However, in the weeks since Ramadan started on April 2, Israeli forces have damaged or destroyed several of the windows in the Al-Aqsa Mosque, as they raided the compound, leaving hundreds of Palestinians injured.

Videos have emerged since the latest outbreak of violence showing what Palestinians have said are Israeli forces deliberately smashing windows, raising the ire of Muslims and non-Muslims alike. Israeli authorities claim that Palestinian youth were behind the damage.

Advertisement

Some on Twitter called it an act of “terrorism” on “world heritage” while others said it was a “total disregard to art and masterful creation”. Another person called it “soul crushing”.

It will take months for these windows to be repaired, said Bassam Hallak, a 67-year-old Jerusalemite, who has been heading the committee in charge of renovating and replacing the windows and roof for both the Al-Aqsa Mosque and the Dome of the Rock for more than 40 years.

This delicate job falls solely on the shoulders of this small department – the Al-Aqsa Mosque and Dome of the Rock Restoration Committee – which generally works with tile, marble and mosaics, and for the windows specifically, sculpt gypsum, wood, plaster [stucco] and stained-glass.

“The stucco stained glass is used in qamariyyahs [skylights] and shamsiyyahs [windows],” Hallak said.

Differently shaped windows are inscribed – some with phrases from the Quran, others with arabesque motifs – and decorated with vegetal, floral and geometric shapes. The replacement windows are hand-made using simple tools, a process that can take between nine and 12 months.

“The process starts with casting then carving at a 45-degree [angle] of deflection,” Hallak explained. “Two sets of windows are made, one on the interior and one on the exterior, to help prevent damage from direct sunlight. The final stage includes mounting the window onto the required slot.”

The restoration committee dates back to 1956, when most of its engineers hailed from Egypt. When the 1967 war erupted, they were forced to leave, and the committee started to work in an official capacity after the al-Aqsa mosque was set on fire in1969 by an Australian visitor.

The committee currently works under the patronage and support of the Jordanian government, and includes members from both Jerusalem and Amman.

“We hope that people will know the work we do, such as repairing gypsum, windows and so on in Al Aqsa and the Dome of the Rock. Whenever a repair is needed, we will do it for Al- Aqsa,” said Ala’a Al-Mohtaseb, one of the craftsmen at the mosque.

Bashir Muwaswis, who was 62 when Al Jazeera interviewed him in 2014 and has since retired, used to make and restore the windows of both religious sites. For more than 30 years, Muwaswis took care of the interior aesthetics of both sites, having taken over the craft after his father retired. He mostly worked alone in a run-down workshop adjoining the Al-Aqsa mosque.

“Every square metre of a window requires between 140 and 150 hours of work, or approximately 25 days,” Muwaswis said at the time. “Before manufacturing the actual window, I go back to the original drawings and spend a lot of time on colour harmony. I particularly like the combination of blue, yellow, green, and red.”

Advertisement
The first stage of making a stucco and glass window involves preparing a wooden frame to hold up the finished product. It features a cavity that is later filled with liquid plaster. After the plaster dries, the window is placed on an iron mount, where a decorative drawing is imprinted on its surface.
Advertisement
The imprinting is done using tracing paper, which is then transferred onto the surface using coal.
"We always go back to the original drawings. We use various shapes: some vegetal, others geometric," said Bashir Muwaswis, who used to make the windows by hand before he retired.
Muwaswis carves out the parts that will be filled with glass by hand using simple precision tools.
Muwaswis carves the designs at a 45-degree angle to ensure the light hits the centre of the buildings.
In the last step, the glass is placed into the cavities from the back, before being mounted in the Dome of the Rock or the Al-Aqsa mosque.
Advertisement
Light shines through an arched, carved plaster and stained-glass window in the Dome of the Rock.
Some of the windows are adorned with inscriptions or arabesque motifs. The coloured glass is imported from Turkey.
"We repair any defects by replacing the glass or repairing some fractures in the wooden frames. If a window is completely damaged, we replace it with a new one that retains the original window's properties," Muwaswis said in 2014.
A sheet of white glass is wedged between two layers of stucco to protect the coloured glass. This technique also subdues the light passing through the windows.